Grupo de Usuarios de Tecnologías Libres

Código: Seleccionar todo

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.32-32-generic-pae 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.21
Linux version 2.6.32-32-generic-pae (buildd@roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #62-Ubuntu SMP Wed Apr 20 22:10:33 UTC 2011
 scanModem update of:  2010_05_29
The modem symbolic link is /dev/modem -> ttySL0
Distrib_ID=Ubuntu
DistribCodeName=lucid


The dkms driver upgrade utilities are installed,

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel   slamr  agrmodem agrserial     

slamrTest=in:
Attached USB devices are:
 ID 046d:c313 Logitech, Inc. 
 ID 046d:c040 Logitech, Inc. Corded Tilt-Wheel Mouse
 ID 054c:01bd Sony Corp. MRW62E Multi-Card Reader/Writer
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

Candidate PCI devices with modem chips are:
01:06.0 Communication controller: Agere Systems Device 0600
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
High Definition Audio cards can host modem chips.

For candidate card in slot 01:06.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 01:06.0	11c1:0600	11c1:0600	Communication controller: Agere Systems Device 0600

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 01:06.0 ----
[    0.196790] pci 0000:01:06.0: reg 10 io port: [0xe800-0xe8ff]
[    0.196821] pci 0000:01:06.0: PME# supported from D3hot D3cold
[    0.196824] pci 0000:01:06.0: PME# disabled

 The PCI slot 01:06.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

For candidate card in slot 00:05.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:05.0	10de:03f0	1043:8290	Audio device: nVidia Corporation MCP61 High Definition Audio 

 Modem interrupt assignment and sharing: 
 22:      23074        725   IO-APIC-fasteoi   ehci_hcd:usb1, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:05.0 ----
[    0.196405] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfff8000-0xdfffbfff]
[    0.196428] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.196431] pci 0000:00:05.0: PME# disabled
[    7.008435] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[    7.008463] HDA Intel 0000:00:05.0: setting latency timer to 64
[    7.648575] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input6

 The PCI slot 00:05.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 01:06.0:
	Modem chipset  detected on
NAME="Communication controller: Agere Systems Device 0600"
CLASS=0780
PCIDEV=11c1:0600
SUBSYS=11c1:0600
IRQ=11
HDA2=00:05.0
slamrTest=in:
IDENT=Agere.SV92PP_no_driver_available

 For candidate modem in:  01:06.0
   0780 Communication controller: Agere Systems Device 0600
      Primary device ID:  11c1:0600
 Support type needed or chipset:	Agere.SV92PP_no_driver_available
 



Predictive  diagnostics for card in bus 00:05.0:
	Modem chipset not detected on
NAME="Audio device: nVidia Corporation MCP61 High Definition Audio "
CLASS=0403
PCIDEV=10de:03f0
SUBSYS=1043:8290
IRQ=22

 For candidate modem in:  00:05.0
   0403 Audio device: nVidia Corporation MCP61 High Definition Audio 
      Primary device ID:  10de:03f0
 Support type needed or chipset:	
 

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.3
             and the compiler used in kernel assembly: 4.4.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.32-32-generic-pae/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.


Compressed files at: /usr/src/martian-modem.tar.bz2


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2011-07-01 18:26 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) || (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout /dev/slusb0)
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/agrsm.conf:## setup agrsm modem with only: "sudo modprobe agrserial" 
/etc/modprobe.d/agrsm.conf:install agrserial /sbin/modprobe --ignore-install agrmodem ; /sbin/modprobe --ignore-install agrserial && \
/etc/modprobe.d/agrsm.conf:remove agrserial /sbin/modprobe -r --ignore-remove agrserial ; /sbin/modprobe -r --ignore-remove agrmodem && { if test -L /dev/ttySAGR; then rm /dev/ttySAGR; fi } ; true
/etc/modprobe.d/agrsm.conf:# to automate bootup  "sudo modprobe agrmodem"
/etc/modprobe.d/agrsm.conf:## to setup agrsm modem with only: "sudo modprobe agrmodem"
/etc/modprobe.d/agrsm.conf:# install agrmodem /sbin/modprobe --ignore-install agrmodem && \
/etc/modprobe.d/agrsm.conf:## of effects of agrmodem and agrserial loading
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

Código: Seleccionar todo

Potentially useful modem drivers now loaded are:
       snd_hda_intel   slamr  agrmodem agrserial    

Código: Seleccionar todo

ale@alepc:~$ sudo wvdialconf 
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3   
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
ale@alepc:~$ 

Código: Seleccionar todo

ale@alepc:~$ lsmod |grep agr
agrserial              10093  0 
agrmodem             1332764  1 
snd                    54244  17 agrmodem,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ale@alepc:~$