Página 1 de 1

configurar modem agere USB

Publicado: Mié, 23 Feb 2011, 18:08
por diango
me gustarian que me explicaran como puedo conectar un modem USB marca Agere en Ubuntu 10.10, ya lo he conectado y no puedo establecer conexion porque el gnome PPP que es el agente que utilizo para conectarme no me lo reconoce todavia, como podria instalarle los drivers

les agradesco de antemano la colaboracion

Re: configurar modem agere USB

Publicado: Sab, 26 Feb 2011, 13:00
por Charli
Si das un poco mas de datos seria mejor..
de cualkier modo.. en terminal
(sudo) dpkg -i ...(el nombre del pakete)
suele funsionar bien... ademas verifica ke tengas instalado el wvdial.. si aun asi no te
funsiona da mas detalles..
salu2, charlie

Re: configurar modem agere USB

Publicado: Sab, 26 Feb 2011, 21:31
por Wolf119
Bueno primero que todo debes de tener instalado los driver para el módem agrsm te recomiendo este paquete que se encuentra en la sección descarga del gutl en driver módem se llamar
agrsm048pci-2.1.60_20100316_i386.deb
, de todas formas es recomendable que te bajes el scanmodem, el cual te dice si encuentra un módem y que paquetes de driver debes instalar y el procedimiento después para configurar el wvdial, toda esa info te la da el scanmodem, una vez hagas esto configuras el wvdial.conf que se encuentra en /etc/wvdial.conf, seria algo así para poder configurarlo como root, pones en la consola

Código: Seleccionar todo

gksu gedit /etc/wvdial.conf
, una vez te habrá quitas los ; que salen delante de las opciones de phoner, password y username y remplazas los valores después del = por tu numero de proveedor y así con el pass y el nombre de usuario, después ejecutas en una terminal con sudo el comando wvdial y debería darte algo mas o menos así:

Código: Seleccionar todo

carlos@carlos-desktop:~$ sudo wvdial
[sudo] password for carlos: 
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT060110
eso quiere decir que reconoció el modem y ya esta marcando :D
Yo tenia ese mismo problema y ya me hice experto montando módem en ubuntu y debian :lol:
Bueno espero te sirva de ayuda

Re: configurar modem agere USB

Publicado: Mar, 01 Mar 2011, 01:03
por diango
hola antes que nada quisiera agradecerles por la ayuda, bueno diré que instalé los paquetes que me dijo el scanModem luego de haberlo ejecutado , tambien hice lo que me dices y aun asi sigue sin reconocerlo, dejo aqui los resultados obtenidos luego de haber ejecutado el scanModem

****************************************************************
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.35-25-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.35-25-generic (buildd@palmer) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011
scanModem update of: 2010_12_12

Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://cu.archive.ubuntu.com/ubuntu/


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:
snd_hda_intel

Attached USB devices are:
ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
ID 047e:2892 Agere Systems, Inc. (Lucent) Systems Soft Modem
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch ... 00578.html

Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 8086:d701 Audio device: Intel Corporation 82801H

Modem interrupt assignment and sharing:
45: 3480 0 PCI-MSI-edge hda_intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.178146] pci 0000:00:1b.0: reg 10: [mem 0x50320000-0x50323fff 64bit]
[ 0.178185] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.178188] pci 0000:00:1b.0: PME# disabled
[ 12.014444] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.014488] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 12.014511] HDA Intel 0000:00:1b.0: setting latency timer to 64

The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.



===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l" are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC1200 Analog : ALC1200 Analog : playback 1 : capture 1
00-01: ALC1200 Digital : ALC1200 Digital : playback 1
00-02: ALC1200 Analog : ALC1200 Analog : capture 1

about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0x50320000 irq 45

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.35-22-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.35-25-generic/kernel/sound/pci/hda/snd-hda-intel.ko

The HDA diagnostics did not recognize a modem chip on the audio subsystem,
though a Conexant chip modem might not be recognized.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 002:
Modem chipset detected on
SLOT="Bus 002 Device 003:"
NAME="Agere Systems, Inc. (Lucent) Systems Soft Modem"
bus=002
USBmodemID=047e:2892
IDENT=agrsm
Driver=agrsm

For a detailed USB cellphone usage report, see http://linmodems.technion.ac.il/bigarch ... 03240.html
For candidate modem in: 002
Agere Systems, Inc. (Lucent) Systems Soft Modem
Primary device ID: 047e:2892
Support type needed or chipset: agrsm



Writing DOCs/Intel.txt

The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair.
There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at: http://linmodems.technion.ac.il/package ... /11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue: http://linmodems.technion.ac.il/bigarch ... 02753.html
For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems this can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf

Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.


All of the above packages are dkms competent. This means that if your Linux distros dkms package
is previously installed, if provides for future updates matching forthcoming kernels.

-------------- end Agere Systems section -------------------


Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=8086:d701
IRQ=45
HDA2=00:1b.0
SOFT=8086:284b.HDA

For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 8086:d701
Softmodem codec or chipset from diagnostics:
from Archives:



Support type needed or chipset:

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD_gcc4.4_alsa1.0.23.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/


The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.5
and the compiler used in kernel assembly: 4.4.5

linux-headers-2.6.35-25-generic resources needed for compiling are not manifestly ready!

If compiling is necessary packages must be installed, providing:
linux-headers-2.6.35-25-generic


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-rwsr-xr-- 1 root dip 273248 2010-07-09 12:41 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmode ... 02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch ... 04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

*****************************************************************


bueno si tienen alguna otra idea soy todo oidos
saludos

Re: configurar modem agere USB

Publicado: Mar, 01 Mar 2011, 10:14
por Wolf119
bueno el scanmodem el paquete que te pide que instales es este agrsm048pci-2.1.60_20100108_i386.deb despues que lo instalas tienes que bajarte del mismo lugar en el ftp del gutl el tool, lo instalas y te dira que uses el comando agrsm test o agrsm-test ahora no me acuerdo bien, cuando lo hagas te creara la configuracion previa en el wvdial.conf, ahora hay un problema el modem agrsm tienes que levantarlo cada vez que lo uses para poder conectarte, tendrias que poner en la consola

Código: Seleccionar todo

sudo modprobe agrmodem
sudo modprobe agrserial
sudo depmod
esto te levanta el modem para cuando hagas sudo wvdial te lo reconoscas, puedes hacer un script para automatisar la funcion, primero prueba esto.
1- instalar las tools
2- ejecuta el comando que te pone cuando termina de instalarse el agrsm test o agrsm-test no me acuerdo bien ahora
2- ejecuta la linea de comando en la consola, los que te deje arrbia
3-prueba el wvdial ( ojo si no configuras el wvdial.conf como te explique al principio, te va a decir que no puede marcar porque no encuetra un nombre de usuario, pass y telefono valido)

cuando hagas eso deja que fue lo que sucedio

Re: configurar modem agere USB

Publicado: Mar, 01 Mar 2011, 23:21
por diango
hice lo que me djistes y aqui estan los resultados

*********************************************************


FATAL: Module agrserial is in use.
FATAL: Module agrmodem is in use.
Loading drivers:

Drivers loaded:
agrserial 9449 3
agrmodem 1183563 1 agrserial

and symbolic link created:
lrwxrwxrwx 1 root root 12 2011-03-01 22:00 /dev/ttySAGR -> /dev/ttyAGS3

Checking for utility wvdialconf
Found /usr/bin/wvdialconf, preparing to run:
wvdialconf /etc/wvdial.conf
A file /etc/wvdial.conf already exists, first renaming to /etc/wvdial.201103010403
mv: no se puede mover «/etc/wvdial.conf» a «/etc/wvdial.201103010403»: Permiso denegado

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
ttySAGR<Info>: Device or resource busy
Modem Port Scan<*1>: SAGR

Modem detection successful
Read wdial.txt
Then edit /etc/wvdial.conf with:
sudo gedit /etc/wvdial.conf
at the lines beginning with ; and deleting the ; < > "
Then try a dialout with:
sudo wvdial


The installation record has been written to ./agrsm-test.txt

********************************************************

ahora cuando escribo en la consola sudo wvdial para marcar despues de haber configurado el wvdialconf no me hace nada, es decir no marca, me vuelve a poner la consola como esperando otra nueva orden

eso es todo............. saludos